You may be wondering why it matters how you mount your artwork for framing. Tape the corners, glue it down, who cares? In fact, it is very important to properly mount your art. Professional mounting techniques, while not necessarily complicated, are essential to keeping your artwork flat and centered in the frame.

This article outlines the different methods for displaying paper prints and original art in a picture frame, to ensure you get the best result and end up with a beautiful, professional-looking piece of decor. As long as acid-free or "conservation" materials are used, all the methods listed below are archival (reversible without damaging the art), unless otherwise stated.

SUMMARY

MAT OR NO MAT?	HINGING METHODS	FLOAT MOUNTING	OTHER MOUNTING METHODS
A mat can add to an artwork, but is not essential. Whether or not you choose a mat will depend on the size of your artwork and frame, and the style you wish to display.	This mounting method allows the artwork to expand and contract with the changes in temperature and humidity over time.	You can choose to float mount rather than mat your artwork. There are two styles: flush float mounting, and raised float mounting.	Photo corners, mounting strips or tabs, or full adhesion are alternate methods of mounting artwork.

1. The blank, often white, space it creates between the frame and the artwork draws the eye, and brings it back in when it reaches the edge.

2. A well-chosen color can draw out subtle hues in the artwork, adding to the viewing experience.

3. The mat will separate the art from the glazing (glass or acrylic), protecting it from moisture that may accumulate, or other damaging issues caused by direct contact.

Depending on your artwork, it may be easier to mount with a mat than without. Frame size is another consideration, however. If you have a specific frame in mind and your print is precisely that size, a mat will not be an option for you. If you have not yet chosen a frame, consider a mat for your artwork and then select a frame accordingly.

For more information, see our related articles:

• All About Mats
• Measuring For a Mat
• Choosing the Best Mat Color
• Choosing the Best Mat Size

MOUNTING WITHOUT A MAT

Some prints come with enough surrounding white space to serve as their own "mat." This is another, optional way to display the art.

Hinging is used to prevent buckling or creasing over time. The paper, as well as the backing and mat, will expand and contract over time due to humidity and temperature changes. Different types of paper shift at different rates, so if the entire piece is fastened down, with tape at each edge, or glue around the edge, this shifting can cause the art to buckle, crease, or even tear.

If proper hinging tape is used, this process is archival, which means the artwork can be removed without any damage, and the adhesive will not damage the art while it is attached. Traditional hinging tissue was not self-adhesive, but required the application of wheat paste (a natural glue), which could then be removed with mineral salts dissolved in water. Today, self-adhesive hinging tissue is more common. It is removed the same way, but does not require wheat paste.

HINGING ARTWORK TO THE MAT

1. The back of the artwork will be fastened to the back of the mat with a single piece of tape or hinging tissue. This piece should be about 1/5th the total width of the artwork. This will be enough to keep the weight of the paper from pulling free or tilting.

2. Make sure the artwork is centered behind the mat so the opening is showing exactly what you want - namely, the white border around the print is hidden. Place your tape in the in the top center of the artwork, with half on the artwork and half on the back of the mat. Press to firmly adhere.

3. It is also possible to hinge your artwork to the backing board, and simply place the mat on top. If for some reason you cannot turn your artwork face-down, this may be the preferable method.

4. Your artwork should now hang freely, fastened only in this one place. Once you have placed it in the frame and it is pressed between the mat and the backing, it will lie flat, with no gap between mat and art.

Front view of a hinged, matted artwork

There are two float mount options:

1. The artwork can be affixed to a backing that will be visible around the art, similar to a reverse mat.

2. Or the artwork can be sandwiched between two panes of glass or acrylic, so the wall on which it is hung is visible within the frame.

Both methods use the same mounting technique; in the second method the mounting board or backing is the second pane of glass. Also in both cases, you have the option to raise your artwork off of the backing, so it creates a shadow effect.

Backing

Although you are not using it as a traditional mat, option 1 does use matboard as the backing. This allows you to choose any color to create a background for your image. Because matboard is quite flexible, you will still want a second, more rigid foam board, carcboard, or wooden backing behind the mat.

Frame

Though any frame can be used for a float mount, a shadow box is often the most successful. These frames have a deep rabbet and when frame spacers are placed between glass and backing, create an attractive, shadowed gap between glass and artwork.

FLUSH METHOD

1. Cut your chosen matboard to the size of the frame opening. Center your artwork on board and mark on the mat just below the top corners, so you know where to place your artwork.

2. Apply the tape or tissue in each top corner of the artwork, about 1/4" down from the edge. (Since there is no mat holding the artwork down, a single center piece may be too weak.

3. Place the artwork down on the matboard, pressing firmly to adhere the adhesive to the mounting board. Leave it lying flat for a few hours to ensure adhesion. You may place a clean piece of paper and then a heavy book on top, if this will not damage the artwork.

4. Once the hinging material is fully secured, place the artwork and mat face down into the frame, followed by the backing.

RAISED METHOD

Once the hinges have dried, you can glue the mounting board to the frame-sized matboard, and place the contents in the frame. It is especially important to have a more rigid backing for a raised float, due to the added weight of the mounting board.

V HINGES

Two strips of hinging tissue are used for this method. The first is affixed to the top back corner of the artwork, and extends onto the mounting board. The second strip is placed perpendicular to the first, across the mounting board just below the edge of the artwork. This second piece helps hold the first in place once the art is hung.

The back of a raised float-mounted artwork

PHOTO CORNERS

Although all four corners of the artwork must be secured with this method, it is possible to space the tabs so the artwork is not tight between them, but has some room to "breath" and expand (though not enough that it falls out if it contracts).

Corners are available in various colors, most commonly black, white, or clear. They can also be made quite easily by folding strips of paper and using glue or double sided tape to adhere them to the mounting board.

If you are framing something for the long term, make sure you purchase acid-free or Conservation corners, to avoid causing discoloration on the edges of your artwork.

ADHESIVE STRIPS

These strips must be concealed behind a mat, since the strips extend past the edge of the artwork. Since one should be placed on each side of the artwork, buckling may still occur.

FULL ADHESION

Double sided tape can be applied around all the edges, or a thin layer of glue can be spread over the back of the print. Any of the above display methods may then be used.

Never, ever use this method on original artwork, or on prints you want to keep for for a long time.

Adhesive strips

• Choose the perfect Picture Frame.

• Pick the ideal matboard color and size for your artwork.

• When placing your order, select the type of plexiglass and color of foam backing you prefer.

• We hope to soon offer hinging tissue and other mounting adhesives. Until then, we recommend this Self-Adhesive Mounting Tissue. No wheat paste required, but it still comes off easily with mineral spirits, and is completely acid-free.

If, at the end of the day, you want to leave the work to someone else, we are happy to do the mounting and fitting for you. Just check "Fitting" when ordering your frame, and mail us your artwork or send us the digital file. We'll print your images and ship you the completely display, ready to hang!

• Fitting Artwork in the Frame

• Hanging Hardware

• Hanging and Displaying Art

If you have any questions about the mounting and fitting your artwork in a frame, or any of our other products or services, please do not hesitate to contact us. Our knowledgeable staff are always happy to answer your enquiries and provide suggestions or advice.

A division of USAOnCanvas.com Houston prints on canvas - Gallery Picture Frames SanAntonio Laser Engraving & Cutting Services